Kicker 45KMF124 12" 350W Single-4-Ohm Free-Air Marine Subwoofer/Sub KMF12 KMF
12" 4Ī© Freeair Marine Subwoofer
BUMP THE BOAT
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KMF series of subs.
Ā
- FEATURES
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded SantopreneĀ® Surround
- UniPlateā¢ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
Ā
Want setup help? Go to KICKERU for a free woofer and amplifier configuration app!
*The KMF 12-inch Subwoofer works best with 175 watts of recommended power. See below for more details.
| Thiele/Small Parameters |
 Ā 45KMF124Ā T/S Parameters PDF |
| Woofer(in,mm) |
| 12, 30 |
| Impedance (OHMS) |
| 4 SVC |
| Peak Power Handling(Watts) |
| 350 |
| Continuous Power Handling(Watts RMS) |
| 175 |
| Sealed Enclosure Volume Min-Max(ftĀ³, L) |
| N/A |
| Vented Enclosure Volume Min-Max(ftĀ³, L) |
| N/A |
| Frequency Response(Hz) |
| 30-500 |
| Mounting Depth(in, cm) |
| 5.5, 13.9 |
| Hole Diameter(in, cm) |
| 11, 27.9 |
| Outer Diameter(in, cm) |
| 13, 32.95 |
| What's in the Box: |
| 1 - 12" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual |
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
12" 4Ī© Freeair Marine Subwoofer
BUMP THE BOAT
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KMF series of subs.
Ā
- FEATURES
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded SantopreneĀ® Surround
- UniPlateā¢ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
Ā
Want setup help? Go to KICKERU for a free woofer and amplifier configuration app!
*The KMF 12-inch Subwoofer works best with 175 watts of recommended power. See below for more details.
| Thiele/Small Parameters |
| Ā 45KMF124Ā T/S Parameters PDF |
| Woofer(in,mm) |
| 12, 30 |
| Impedance (OHMS) |
| 4 SVC |
| Peak Power Handling(Watts) |
| 350 |
| Continuous Power Handling(Watts RMS) |
| 175 |
| Sealed Enclosure Volume Min-Max(ftĀ³, L) |
| N/A |
| Vented Enclosure Volume Min-Max(ftĀ³, L) |
| N/A |
| Frequency Response(Hz) |
| 30-500 |
| Mounting Depth(in, cm) |
| 5.5, 13.9 |
| Hole Diameter(in, cm) |
| 11, 27.9 |
| Outer Diameter(in, cm) |
| 13, 32.95 |
| What's in the Box: |
| 1 - 12" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual |
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
